Overclocking is related to increasing the speed of a CPU, GPU or any other part per second, to perform effectively. In order to deal with heating problems, it must be ensured that proper cooling is provided to the CPU. The facility of overclocking can be enjoyed if the manufacturer’s CPUs are accompanied by unlocked multipliers. If you are looking forward to overclock your system, you must focus on purchasing an overclock friendly hardware.


You can opt for getting your CPUs overclocked due to following reasons:

With the help of overclocking, your CPU will be able to carry out steady operations.
If you are a gaming enthusiast, you’ll expect smooth and speedy performance of your hardware. However, in the presence of modernized CPUs, the charm of overclocking has lost somewhere.


As you overclock the CPU, you increase the CPU’s heat. If you overclock beyond limits, or if you don’t cool it properly, there are chances that you end up permanently damaging the CPU chip.
Although it is not common for the hardware to get damaged, there are high chances that overclocking may lead to an unstable computer. It is also common to expect system errors and restarts.


Before starting with the procedure of overclocking, you must ensure that there are minimum chances of heat. For this purpose, a heat sink and fan is given along with the CPU to control heat produced. You may also use a water-cooling base to minimize the amounts of heat generated while overclocking. Firstly, it is pushed through tubes for extracting the heat. Then, it is taken out of the case where the radiator releases heat in the air.


In order to overclock in BIOS, you will be required to have access to computer’s BIOS and enhance the CPU’s voltage or clock speed as per your preference. After you have increased it by a small amount, boot your computer. You must ensure that the temperature of your computer is not high and proper cooling is still taking place. If cooling will be affected, it will have a direct impact on your computer. The level of overclocking should not be increased in one go, instead the system should be overclocked by making small increases in temperature till the time system is running constantly. If instability arises, the temperature should be reduced to the previous level.


You can get overclock related information from various sites including overclock.net and certain guides for CPUs.

Leave a Reply

Your email address will not be published. Required fields are marked *